BIOS

BIOS Setup

Turn on the PC and with a few steps away from your PC is ready to enjoy.

Patience ......
PC has finished your raft, but need some more before setting you can use. And this time deh Remove screwdriver and other equipment.
All you need is not on-TIK KIBOR or klak-click with the mouse only, because you set the BIOS and install the operating system only.
At this practice we use the operating system Windows XP Professional (Original).
O ya, if you find a problem, do not rush panic. You can see the different possible causes and solutions in the troubleshooting section at the end of this report. Dandy Derry | @ Dit

Set the BIOS

STEP 1
Connect the monitor, KIBOR, mouse and other peranti on the PC. Do not forget Plug power cable to the power port on the back of the PC. After that, press the power on the PC and turn on the computer monitor for your assembly. PC podići immediate process.

STEP 2
Head pressing the button [Delete] on the KIBOR to go to the BIOS / CMOS setup.

STEP 3
You will enter the BIOS. At this workshop, we use a motherboard that uses AwardBIOS. So the following steps are developed based on the AwardBIOS. BIOS settings for other types of more or less the same kok. Well, the first thing you should do is set a time that will be used by the computer system. Arrange through the [Main] [System Time]. To change it, use the keys [+] [-] button and [Tab] on your KIBOR 1

STEP 4
Then, in the same way, change the system date on your computer through the [System Date].

STEP 5
After setting the time and date of the system, if you want, you can also install the BIOS password so that people can not change the BIOS settings that you create. How, select the [Supervisor Password], then press the [+] on the KIBOR. Next, enter your password on the Enter Password box, then click [Enter]. Re-enter your password in the Confirm Password box, and then again click [Enter]. Well, now the status of Supervisor Password option sure to be Enabled.

STEP 6
If your PC will be used rollicking, you can also set a user password for each user. Take advantage of only the [User Password]. Mengesetnya the same way with how the settings on the supervisor password.

STEP 7
Now go to the [Advanced] by pressing the button [‡] (direction of the arrow to the right) on the KIBOR you select [I / O Device Configuration] and then [Enter]. 4

STEP 8
Here you can manage the use of onboard features on your motherboard. For example, when you use the sound card and modem that is not on-board, change the option [Onboard AC97 Audio Controller] and [Onboard AC97 Modem Controller] to be [Disabled] by pressing the button [+] KIBOR on you. Then click the [ESC] to return to the [Advanced].

STEP 9
Now select the option [PCI Configuration] and press [Enter]. Then the USB slot so that the work you set the option [USB Function] into [Enabled]. If not, you can change it by pressing the button [+]. If you have, go back to the [Advanced] button by pressing the [ESC].

STEP 10
Then you can change the management of the use of electricity from the computer through the [Power] button by pressing the [‡]. But for the sake of convenience, regardless of any change things in this setting.

STEP 11
Next open the [Boot]. Well, for easy installation of the operating system that will be done after this, change the pattern to boot from the PC. Set CD ROM as first boot device, then the hard disk as the boot device to boot Floopy and two to three devices, using the keys [+] or [-]. The point, so that every time booting, the computer search for the operating system on the CD-ROM first, then a new hard disk, and Floopy.

STEP 12
Insert the Windows XP installation CD to CD-ROM drive. After that, select the [Exit] [Exit Saving Changes] to exit the BIOS and save settings you made Searched. Then the computer will restart. And earlier if you enable user password, the password will appear bok. Fill in the password so the computer can continue the booting process.